Scanner Setup

Scanner Setup
 
This sceen will give you scanning options. You can set the resolution of your image and create profile to store for future scans. Not all scanners will respond to scanner software.
1

Additional Tabs

1. Additional TabsThese tabs give you additional tools. The Test Scanner tab works when you have setup a profile and clicked the test scanner profile button. It will allow you to see how the page will look once scanned and adjust any mistakes. The Setup Scanner Document tab will allow you to adjust the document types and add new document types for future use.
 
2

Profile Name

2. Profile NameEnter a profile name to store commonly used scanner options.
 
3

Freindly Name

3. Freindly NameThis name will help you to remember what options belong to this profile. You may want to use the name of the scanner, the resolution, and the mode. Ex: For a scan using a HP scanner, set at 200 resolution, in color you would use HP200Color
 
4

Scan Source

4. Scan SourceThis will display the name of the scanner which you have choosen to scan from.
 
5

Enable Sheet Feeder

5. Enable Sheet FeederThis option will set up the sheet feeder on the scanner. The Do Not Set option is good for scanners that do not respond well to scanner software.
 
6

Scanner Interface

6. Scanner InterfaceOnce you have choosen a scanner the scan manager will check to see if that scanner can be controlled by this scanner software. This box will be checked if the scanner will follow the scanner options.
 
7

Display Scanner

7. Display ScannerThis will open the default scanner software from your scanner when you are ready to scan. It will try to use the options you have choosen in the scan manager.
 
8

Enable Auto Feed

8. Enable Auto FeedThis option tells the scanner to continue scanning multiple pages that are already in the feeder. Some scanners may already be set up to do this.
 
9

Scan Mode

9. Scan ModeSelect your document to be scanned in color, grayscale, or black and white.
 
10

Delete

10. DeleteThis will delete the profile from storage.
 
11

Reset

11. ResetTo clear the options that had been choosen in the profile click here.
 
12

Save Profile

12. Save ProfileThis allows you to save the scanner options that you have set to use for future scans.
 
13

OK

13. OKOnce you have set your options this will begin the scan.
 
14

Add Profile

14. Add ProfileUse this button to add a new profile to your list for different scanner options.
 
15

Select Scanner

15. Select ScannerChoose the scanner you would like to use in this profile to scan from. This button will give you a list of scanners linked to your computer.
 
16

Document type

16. Document typeChoose from the list of document types to use for your scan profile. This will tell the scanner the size of the image that you are going to scan. You can create new sizes in the Setup Scan Document tab. This makes it possible to only scan sections of a full page.
 
17

Edit field

17. Edit fieldThese offsets allow you to adjust what area the scanner saves. If you would like to come in from the corner where your scanner reads you can adjust the X and Y offsets to the positions you would like.
 
18

Display Progress Indicators

18. Display Progress IndicatorsThis otpion will allow to have a progress bar during the scanning to see where you are and how much more you have to scan.
 
19

Scan Size

19. Scan SizeThis tells you the measurements of the width and height of the choosen document type.
 
20

Units of Measure

20. Units of MeasureIndicates how the width and height are being measured for the document type you choose.
 
21

Remove Type

21. Remove TypeThis will remove any choosen document types and clear the information in this section.
 
22

Resolution

22. ResolutionSet the resolution of your scanned images. A lower resolution will be harder to read the image on the monitor. A larger resolution will be more clear, but will take longer to scan amd will be a larger file.
 
23

Default

23. DefaultOnce you have created a profile you can choose to make it your default profile.
 
24

Test Scan

24. Test ScanThis feature will test the options that have been choosen to see if your scanner will respond to the comands. This will take you to the Test Scanner tab and give you a preview of what the scan will look like. You can then adjust for any mistakes.
 
25

Cancel

25. CancelCancel out of the Scanner Setup and do not save any added information.
 

Created with help of Dr.Explain

#DE_FOOTER Photo Sharing and Video Hosting at Photobucket